You are here: Home » Products » Water Pump » Surface Pump » PH Vertical Household Hot Water Pump Booster Pipeline Centrifugal Pump



PH Vertical Household Hot Water Pump Booster Pipeline Centrifugal Pump

facebook sharing button
twitter sharing button
line sharing button
linkedin sharing button
sharethis sharing button

Product overview

PH series pumps are hot water circulation pumps, suitable for industrial and urban water supply and drainage, pressurized water supply in high-rise buildings, garden sprinkler irrigation, HVAC refrigeration cycle, etc., the transport medium is water and other liquids with physical and chemical properties similar to water.

The pump is a vertical structure, the inlet and outlet caliber is the same, and located on the same center line, could be installed in the pipeline like a valve, if with a protective cover, could be placed in outdoor use. The impeller is directly mounted on the lengthened shaft of the motor, the axial size is short, the structure is compact, the hydraulic parts are well matched with the motor, and the radial and axial load generated by the operation of the pump is effectively balanced, thus ensuring the smooth operation of the pump and the vibration noise is very low. Mechanical seal using wear-resistant material, effectively extend the service life of mechanical seal. The series and parallel operation mode and installation mode of the pump can be selected according to the requirements of use.

Working conditions

The ambient temperature:0〜40°C;

Medium temperature:0〜100°C;

Relative humidity <90%;

Altitude :<1000M;

The volume content of solid particles in the conveying medium does not exceed 0.1% of the unit volume, and the particle size is <0.2mm.



  • logo
  • Sign up for our Letor newsletter
  • get ready for the future
    sign up for our newsletter to get updates straight to your inbox