The water pump is used to irrigate plants in agriculture. It pumps water from a well or other water source and directs it through a pipe system to the roots of the plants. The water pump plays an important role in agriculture by providing a reliable water source for the plants in periods of drought or dry weather.
What is the function of the water pump?
How does the water pump work?
What should we pay attention to before installing the water pump?
What is the function of the water pump?
The water pump is responsible for the circulation of water in the cooling system. It is typically driven by a belt connected to the motor. The pump circulates the water through the radiator, where it is cooled, and then back to the engine.
How does the water pump work?
Before starting the pump, the pump and the water inlet pipe are filled with water. After the pump runs, under the action of centrifugal force generated by the high-speed rotation of the impeller, the water is hurled around in the flow channel of the impeller, pressed into the spiral and formed a vacuum of the impeller at the inlet. The water in the basin is sucked in along the suction pipe under the atmospheric external pressure to complement this space. Then the inhaled water is ejected through the impeller through the spiral and enters the water outlet pipe. It is evident that if the impeller of centrifugal pump rotates continuously, water can be continuously absorbed and pressed, and the water can be continuously raised from a low place to a high place or distance. In summary, the centrifugal pump is called a centrifugal pump because of the centrifugal force generated by the high-speed rotation of the impeller and lifting the water to a high point.
What should we pay attention to before installing the water pump?
1.If the geographical environment allows, the pump should be as close as possible to the water source to reduce the length of the suction line. The foundation of the pump installation site should be firm, and for fixed pumping stations, a special foundation should be repaired.
2.The water inlet pipe should be tight and reliable, must have a special support and must not be hung on the water pump. For bottom valve water inlet pipes, the axis of the bottom valve should be installed as far as possible perpendicular to the horizontal plane, and the angle between the axis and the horizontal plane should not be less than 45°. If the water source is a channel, the bottom valve should be more than 0.50 meters above the water floor, and a net should be added to prevent dirt from entering the pump.
Qiantao's main products include water pump, motor and air compressor. Qiantao is committed to producing high quality products and adheres to the business philosophy of "quality first, based on integrity" to serve customers all over the world.
