Operation Manual
Warning: inflammable and explosive materials is strictly prohibited
Please read the details before using the product
This product mainly uses in the mining machinery, the project machinery, like the bulldozer, the excavator, the car loader and so on the mechanical device refuels and the automobile supplies for oneself the power source to refuel with the oil transfer.
Our pump has the advantages of fast self-priming oil pump、high-lift、 large capacity meter、small in size, convenient to carry, highly saved the oil transfer time
Type | Voltage | Flow | Suction | Lift | Power | Electric |
ZYB-60-12DC | DC12 | 6o | 3-9 | 10-18 | 150 | 12 |
ZYB-70-24DC | DC24 | 70 | 3-9 | 10-20 | 180 | 8 |
ZYB-60-220AC | AC220 | 60 | 3-9 | 10-15 | 150 | 0.6 |
ZYB-80-220AC | AC220 | 80 | 3-9 | 22-25 | 550 | 2.5 |
ZYB-80-12DC | DC12 | 80 | 3-9 | 22-25 | 550 | 38 |
ZYB-80-24DC | DC24 | 80 | 3-9 | 22-25 | 550 | 20 |
Our pump pulls out best delivers the medium is cleaning oil product like diesel oil or kerosene, Explosive ,oil products and coherent oversized oil products, like machine oil, gear oil is strictly prohibited.
Method of application:
1. Before the using, should confirm the power source whether with oil pump voltage match case, voltage allowable deviation土10%
2. The direct-current oil pump power source has positively (+) and negatively-extremely divides, the red line is a positive electrode, Otherwise oil pump reverse, not feed
3. Before this pump using, must let the level lying aside, and achieve pulls out the best effect
4. The tum over drill tubing shows the direction connection according to the arrow, the Intake pipe and the street comer does not have to leak air, guarantees the suction stroke
5. This self-priming oil pump is the diesel oil special-purpose gasoline-feed pump, Uses in the low ignition point not suitably the gasoline and the high viscosity machine oil refuel
6. The intake pipe was sure to remember the installment necessary mesh, avoids the flinty sundry goods suction pump cavity damaging the pump core, blows the piece,And must eliminate the mesh surface contamination frequently, the mesh surface cannot use the silk stockings to wrap the meticulous filtration,only can leave the drill studding terminal to wrap with the silk stockings filters again, Otherwise mesh blocking creates the cement capacity reduction and the pump damage
7. The oil pump may the continuous working, the non-oil idle operation not have to surpass 1 minute, in order to avoid the pump core, blows the piece fiction super heat to damage
8. After the oil pumps works for 500 hours,please invite the specialist maintain the maintenance.
Common breakdown and elimination method